2.4G RF Transceiver
• 13 commands to cover all the radio tasks
• No detailed RF techniques needed, all RF tasks completed by on board MCU
• International Radio Band: 2.4 - 2.524GHz
• Total RF channels: 125
• Size (29ⅹ24ⅹ1.8mm)with on board antenna
• RF Power level: 0dBm、-5 dBm 、-10 dBm 、-20 dBm
• RF distance: 80m(Max)
• May use as an SMT part on customer PCB
• Wide applications: Toy、Wireless Mouse、Wireless keyboard、Wireless sensor、Telemetry
Electrical Parameters:
Parameter Value Min Typical Max Unit
Frequency 2400 2524 MHz
Temperature -30 25 80 ℃
Supply Voltage 2.0 3.0 3.6 V
Current(Tx) 7.0 10.5 12 mA
Current(Rx) 18.5 19 19.5 mA
Current(Power down)400 410 420 nA
RF Output power -20 -50 dBm
RF Rx sensitivity -80 -90 dBm
Data rate 250 1000 Kbps
2.4G RF Transceiver Developer Kit
• Help customers design better wireless communication applications at lowest cost
• MD24-10K is designed to run under Windows 2000 or XP operating system. The computer should have a CPU speed higher than 400MHz and be equipped with at least one serial port (COM port.)
• Connect to RS232 on host PC
• Supply voltage: 6V
• Current: 28 mA
• 13 commands to cover all the radio tasks
• No detailed RF techniques needed, all RF tasks completed by on board MCU
• International Radio Band: 2.4 - 2.524GHz
• Total RF channels: 125
• Size (29ⅹ24ⅹ1.8mm)with on board antenna
• RF Power level: 0dBm、-5 dBm 、-10 dBm 、-20 dBm
• RF distance: 80m(Max)
• May use as an SMT part on customer PCB
• Wide applications: Toy、Wireless Mouse、Wireless keyboard、Wireless sensor、Telemetry
Electrical Parameters:
Parameter Value Min Typical Max Unit
Frequency 2400 2524 MHz
Temperature -30 25 80 ℃
Supply Voltage 2.0 3.0 3.6 V
Current(Tx) 7.0 10.5 12 mA
Current(Rx) 18.5 19 19.5 mA
Current(Power down)400 410 420 nA
RF Output power -20 -50 dBm
RF Rx sensitivity -80 -90 dBm
Data rate 250 1000 Kbps
2.4G RF Transceiver Developer Kit
• Help customers design better wireless communication applications at lowest cost
• MD24-10K is designed to run under Windows 2000 or XP operating system. The computer should have a CPU speed higher than 400MHz and be equipped with at least one serial port (COM port.)
• Connect to RS232 on host PC
• Supply voltage: 6V
• Current: 28 mA